Trotec DA 3 Flow control unit

Product Code: DA 3

Details

Flow rate control unit for significantly faster drying times during vacuum drying. The DA 3 MultiQube's has an intelligent flow rate control system called Efidry which is enables water damage restoration companies to benefit from significantly faster drying times. Efidry enables you to actively perform suction load management between drying zones during vacuum drying. It focuses the compressor's main suc�tion power on one of three controlled drying zones at a time in regular intervals and achieves significantly faster overall drying times of as much as 30 - 70% depending on the extent and type of damage. Three synchronised control cycles al�low you to actively control three separate drying zones, which can then be easily expanded using sub-distributors.

Out in the field, "fresh water damage" is often characterised by uneven distribution of moisture. Efidry ensures that the bulk of the drying units power is delivered to the wettest area, and once all connected areas are showing equal moisture load the power is evenly spread. This simple control logic in the DA3 ensures that drying times are as short as possible. But that's not all. The DA 3 MultiQube also allows you to achieve far faster drying times when the saturation is evenly spread or even when there is standing water. Yet despite the highly sophisticated control technology behind this drying unit and the special Efidry automatic control system, the DA 3 is easy to handle and easy to operate: All you need to do is install the flow rate control unit between the water separator and the drying zone and switch it on.
Like all the MultiQube units, the DA 3 is ex�tremely flexible and can be stacked and oper�ated in combination with the other MultiQube system components "all from the same mould". The DA 3 does not have to be stacked, of course, and can also be used with other vac�uum drying units like the VE 6.

• For 30 to 70 % faster drying times
• Extremely fast and even insulation zone drying
• Efidry automatic control system developed especially for restorative drying
• Active control of three separate zones - can be easily expanded with sub-distributors
• Optimised for flexible combo operation with MultiQube System components
• Incredibly easy to use: just hook up the hoses and switch it on - that's all!'TitleValue Air transport hose connecting pieces2 x 3 connectors @ 38 mmØ for connection to WA 4i or WA 6i Max. suction by vacuum method225 mbar Input voltage230 V Dimensions L x W x H435 x 435 x 435 mm Weight approx.7.2 kg